First Solar Series 6 440W Thin Film Solar Panel

These panels are only located at our Savannah, GA facility.

Features:

• New, open box
• Thin film solar panel
• Superior temperature coefficient, spectral response and shading behavior means more energy per watt vs. conventional c-Si modules
• Innovative under-mount frame with SpeedSlots enable the industry’s fastest installation times and lowest mounting hardware costs
• Dual junction box design reduces wire management complexity and cost
• Best-in-class durability and reliability
• No power loss from LiD or LeTID
• Immune from power loss due to cell cracking

Specifications:

• Rated Power: 440W
• Open circuit voltage (VOC): 220 V
• Max power voltage (VMP): 184.7 V
• Short circuit current (ISC): 2.55 A
• Max power current: 2.38 A
• Maximum system voltage: DC1500 (IEC/UL)
• Fuse Rating: 5 A
• Split junction box design
• Frame: Anodized aluminum alloy
• Weight: 76 lbs
• Dimensions: 2009 × 1232 × 49mm (79.10 × 48.50 × 1.92 inches)

Please note the First Solar 440W panels are high voltage, low amp panels. They are much larger and heavier than your typical panel. Before purchasing, please make sure the specs fit within your application. These panels are typically used for commercial and agriculture application using high voltage inverters. Due to the 200+ open voltage on these panels  they are not a good fit for low voltage off grid setup and those setups using Optimizers/Microinverters.