MPP LV6048 6K Inverter with 7.5KW 250W Off Grid Solar Panel Kit



Out of stock

MPP solar kit with LV6048 Off Grid Inverter 7.65kw of used SanTan Solar T-Series 250W solar panels. Check out our racking options. Perfect for a small DIY grid tie solar project.

Kit Includes:

  • 1 x new MPP LV 6048 Hybrid Inverter
  • 30 x used 250W panels
    • Kit can include any brand of 250W panels. Typically would be REC, Yingli, Trina, Canadian, Qcell, etc.
  • 2 x Midnite Solar Combiner Box 6 MNPV6
  • 10 x Midnite Solar Circuit Breaker 15A
  • 1 x 300 ft. of red PV wire with MC4 connectors
  • 1 x 300 ft. of black PV wire with MC4 connectors
  • 1 x 20 pack of MC4 connectors (male & female)
  • 5 Way Circuit Breaker Box For PV Array Disconnect HT-5
  • 2 x 63A 2 Pole Mini Circuit Breaker 250V
  • Suntree 1000V 250A 2P DC Molded Case Circuit Breaker

Accessories not included:

  • wire to connect the combiner boxes with the inverter. Depends on length. 25' - 8AWG, 50' - 4AWG, 100' 2AWG.
  • 2/0 wire with ring posts to connect inverter to Suntree circuit breaker.


The MPP LV6048 is simplifying off-grid solar power.  This is a complete solar system in a box.  These units have been a staple in the off-grid solar power community for years for good reason. All you need to do is mount the box to the wall, connect your panels and your batteries and your in business. You have a fully functioning off-grid solar kit.  The  LV6048 is a perfect beginner friendly option for someone who wants to install a big off grid solar system, but doesn't have a ton of experience. With everything built-in to both MPP LV6048 units - you can literally be up and running off grid within hours..

Midnite Solar Combiner Box:

MNPV6 (For 150 VDC charge controllers and 600 VDC gridtie inverters). Gray aluminum type 3R rainproof enclosure with insulating dead front, will accept six 150VDC breakers or four 600/1000VDC fuse holders. Includes 15 position PV negative bus bar, 14 position ground bus bar, 120 amp Plus bus bar for breakers and 80 amp bus bar for fuses. Punch out tabs on the plastic deadfront make for a clean installation using circuit breakers. An included snap in adapter makes for a professional looking installation when installing fuse holders. Up to three 300VDC breakers from 7 to 50 amps may be installed as a disconnect (no combining busbar).

Solar Panels:

These are used panels in good physical condition. Manufacturing labels have been removed. Panels have been tested and have a good output. These would need to be for off-grid applications.


  • 60 cell, polycrystalline
  • Weather resistant. Certified for salt mist and ammonia resistance
  • Anti-Reflection surface treatment


  • Rated Power: 250W
  • Open circuit voltage (VOC): 37.6 V
  • Max power voltage (VMP): 30.3 V
  • Short circuit current (ISC): 8.85 A
  • Max power current: 8.27 A
  • Power Tolerance 0/+3%
  • Maximum system voltage: 600V (UL)
  • Fuse Rating: 15 A
  • IP65 Junction Box w/MC4 Compatible Connectors
  • Frame: Anodized aluminum alloy
  • Weight: 41 lbs.
  • Dimensions: 64.95 × 39.05 × 1.37 inches (1650 × 992 × 35mm)

Additional information

Weight 1500 lbs

Out of stock

SKU: LV6048-7.5KW-KIT Categories: , , ,

Related Products