MPP LV6548 6KW Off Grid Solar Panel Kit
$4,000.00
-
Out of stock
MPP solar kit with LV6548 Off Grid Inverter 6kw of used SanTan Solar T-Series 250W solar panels. Check out our racking options. Perfect for a small DIY grid tie solar project.
Kit Includes:
- 1 x new MPP LV 6548 Hybrid Inverter
- 24 x used 250W panels
- Kit can include any brand of 250W panels. Typically would be REC, Yingli, Trina, Canadian, Qcell, etc.
- 2 x Midnite Solar MNPV12-250 combiner box
- 4 x Midnite Solar Circuit Breaker MNEPV15-300
- 1 x 200 ft. of red PV wire with MC4 connectors
- 1 x 200 ft. of black PV wire with MC4 connectors
- 1 x 10 pack of MC4 connectors (male & female)
- 2 x 63A 2 Pole Mini Circuit Breaker 250V
- 1 x Suntree 1000V 250A 2P DC Molded Case Circuit Breaker
Accessories not included:
- wire to connect the combiner boxes with the inverter. Depends on length. 25' - 8AWG, 50' - 4AWG, 100' 2AWG.
- 2/0 wire with ring posts to connect inverter to Suntree circuit breaker.
Inverter:
Specifications:
- 6.5kw / 48V pure sine wave output 120V AC
- 120A Mppt at max 250Voc – 2 x (60A – 4kW MPPT Charge Controllers)
- 120A Utility Charger (120A at 48V = 5.7kW or 48A at 120V)
- High PV Input 250V (Voc) Open circuit)
- Supports Equalization Charge up to 62V
Features:
- Built in Genset dry contact start/stop relay
- Lithium / LiFePO4 , AGm, Flooded, Silica Salt battery compatible, and more (custom parameters can be set according to any battery between 40 and 62V)
- Can be timed to only charge the battery via Utility power during certain hours (load shifting to charge on off peak rates, and using the battery during peak tariffs)
- Battery fewer operation (singe unit mode only) (When using two or more, battery IS REQUIRED, due to the erratic nature of solar energy)
- Built in parallel kits/ Parallelable up to 6 units
- Built in Wifi Transmitter
- Dual PV inputs
- BMS Support (Pylontech, Weco, Soltaro) – Separate BMS cable required
- Timer for output and Timer for charging
- Built In LED RGB panel display to show operational mode
Midnite Solar Combiner Box:
The MNPV12 will accept 12 single-pole 150 VDC breakers or ten 600/1,000 positive VDC fuse holders. It includes a 15-position PV-negative busbar, 15-position ground bus bar, and two 200 A Plus busbars for breakers or fuses. Positive busbars can be combined or separated to support two grid-tie inverters or two charge controllers. Most charge controllers and grid-tie inverters can have a common negative PV bus (except
Solar Panels:
These are used panels in good physical condition. Manufacturing labels have been removed. Panels have been tested and have a good output. These would need to be for off-grid applications.
Features:
- 60 cell, polycrystalline
- Weather resistant. Certified for salt mist and ammonia resistance
- Anti-Reflection surface treatment
Specifications: (will vary slightly depending on panel brand/make)
- Rated Power: 250W
- Open circuit voltage (VOC): 37.6 V
- Max power voltage (VMP): 30.3 V
- Short circuit current (ISC): 8.85 A
- Max power current: 8.27 A
- Power Tolerance 0/+3%
- Maximum system voltage: 600V (UL)
- Fuse Rating: 15 A
- IP65 Junction Box w/MC4 Compatible Connectors
- Frame: Anodized aluminum alloy
- Weight: 41 lbs.
- Dimensions: 64.95 × 39.05 × 1.37 inches (1650 × 992 × 35mm)
Additional information
Weight | 1171 lbs |
---|
Out of stock