Kit Includes:

• 1 x new MPP LVX 6048 Hybrid Inverter
• 24 x used 250W panels
  • Kit can include any brand of 250W panels. Typically would be REC, Yingli, Trina, Canadian, Qcell, etc.
• 1 x Midnite SolarMNPV6 combiner box
• 3 x Midnite Solar Fuse 15A 1000VDC DIN Rail Mount
• 3 x 1000V Touch Safe Fuse Holder for Midnite Solar MN Fuses
• 1 x 300 ft. of red PV wire with MC4 connectors
• 1 x 300 ft. of black PV wire with MC4 connectors
• 1 x 5 pack of MC4 connectors (male & female)
• 1 x Solar PV Combiner 32A DC Disconnect Switch
• 1 x Suntree 1000V 250A 2P DC Molded Case Circuit Breaker
• 1 X 1 pc PowerUpESS 5.1kwh Battery

Inverter:

MPP LVX6048 Hybrid Inverter Split Phase 120/240VAC 48V

Specifications: 

• 120V/240V output voltage, suitable for USA / PR
• 48V system voltage
• Max 6KV output, pure sine wave
• Max solar charging 100A MPPT
• Max utility charging 100A
• MPPT charger 100A
• Max 6KW PV array support
• Max PV input 450 VDC (Voc)
• 120V/240V Split Phase capable

Features:

• Built-in genset starter dry contact
• Extensive programmable functions
• Adjustable bulk/float/low cut off setting
• Indoor installation only
• LCD + LED indicators
• FREE monitoring software
• Parallel up to 9 units**
• Built-in Wi-Fi transmitter
• BMS COMMUNICATION (Pylontech / Soltaro / WECO BMS systems are supported)
• Battery less support

 Solar Panels:

Used 250W 60 cell solar panels. Can be any mfg to include but not limited to Trina, REC, Yingli, Canadian Solar, Qcell, etc. Panels will be of the same mfg and model.

Features:

• 60 cell, polycrystalline
• Weather resistant. Certified for salt mist and ammonia resistance
• Anti-Reflection surface treatment

Specifications: (will vary slightly depending on panel brand/make)

• Rated Power: 250W
• Open circuit voltage (VOC): 37.6 V
• Max power voltage (VMP): 30.3 V
• Short circuit current (ISC): 8.85 A
• Max power current: 8.27 A
• Power Tolerance 0/+3%
• Maximum system voltage: 600V (UL)
• Fuse Rating: 15 A
• IP65 Junction Box w/MC4 Compatible Connectors
• Frame: Anodized aluminum alloy
• Weight: 41 lbs.
• Dimensions: 64.95 × 39.05 × 1.37 inches (1650 × 992 × 35mm)

PowerUpESS 5.1kwh LFP Battery Rackmount

Batteries come with the brackets to rack mount but the brackets used for stacking are sold separately.

POWERUPESS  is a provider of  high quality energy storage system using Lithium Iron Phosphate . Our current model is made with   Grade-A UL Listed cells with a high quality and Reliable BMS.  The integration (closed-loop-communication) of our product with other power electronics  is seamless.

A Grade UL Listed cells, same factory as competition product

Important!  Warranty only applies if connected to MPP Solar or Growatt charge controllers  (Some charge controllers such as PWM and other MPPTs  etc drastically overcharge and can damage BMSs and cells by putting the entire Solar Array open circuit voltage directly to the battery terminals)

BMS communication, BMS IS compatible with MPP Solar and  Growatt  (cables purchased separately)

5 Year Warranty 6000 Cycles 90% DOD ,

Electric Specs:

• Nominal Voltage 51.2 V
• Mean Operation Voltage 49.5-50.5V
• Nominal Capacity 100 Ah
• Energy 5120 Wh
• Communication CAN 2.0 / RS232/ RS485
• Resistance ≤40 mΩ @ 50% SOC

Charge: 

• Recommended Charge Current 20A (Charge time: ≈6hrs)
• Maximum Charge Current 100A (Charge time: ≈2hrs)
• Charge Over Current Protection (BMS) 110±5A
• Recommended Charge Voltage 53.2-54V
• Charge Cut-Off Voltage (BMS) 3.70±0.025 V/Cell (1sec)
• Reconnect Voltage (BMS) 3.45±0.02 V/Cell
• Balancing Voltage Threshold (BMS) 3.45V/Cell