SOL-ARK 8K 120/240 48V 10KWH Storage 10KW Array Solar Kit
$11,700.00
-
Kit includes:
- Sol-Ark 8K Hybrid inverter
- Qty 40 Used 250W Solar Panels
- Qty 2 PowerUp 5.12KWH Battery
- 200' of red and 200' of black 10AWG PV Wire
- Pack of 10 MC4 connectors (spares included)
Sol-Ark 8K Pre-Wired Hybrid Inverter System is a all-in-one system that includes an inverter, charger controller, a display with remote monitoring. The Sol-Ark is simple to install to a Grid-tied, Off-Grid, or Battery Backup solar system, while being able to manages power to and from Solar, Battery, Grid, Loads, and Generator.
SA-8K Features:
- Simple to install with touchscreen interface
- Grid Tied Mode: Sell your power to reduce electric bill
- Meter Zero Mode: Zero your electric bill without a smart meter
- Time of Use: Use solar and batteries to minimize grid power usage
- Programmable Smart Load Mode
- DC and AC Coupling
- Works with a wide range of battery chemistries- Lead acid to Lithium
- Integrated PV DC Disconnect Switch, ground fault detection, PV rapid shutdown control(devices sold separately), PV lightning protection, PV string input reverse polarity protection, AC output breakers 63A, 250A battery breaker/disconnect, surge protection.
SA-8K Specifications:
- AC Voltage: 120/240V split phase
- AC Frequency: 60/50 Hz
- Max Continuous AC Output Power: 8,000W
- Max Allowed PV Power: 11000W
- Solar Input Power: 9000W
- Number of MPPT: 2
- Max Solar Strings per MPPT: 2
- MPPT Voltage Range: 150-425V
- Max Input Current: 18 Amp (per mppt)
- Inverter Efficiency: 96.0%
- Listings & Certifications:UL1741-2010/2018, IEEE1547a-2003/2014, FCC 15 class B
- Weight: 75. lbs
- Dimensions (H x W x D): 30.0" x 18.30" x 10.0"
Inside the 8K box
- Manual
- WiFi Plug with screws
- Battery Resistors 2
- Limiter Sensors (sm) 2
- Toroid
- Allen Key
- Mounting Bracket
- Battery Temp Sensor
- POWERVIEW DONGLE SOLD SEPARATELY
5 Year Standard Warranty
Used 250W Solar Panel
Features:
- 60 cell, polycrystalline
- Weather resistant. Certified for salt mist and ammonia resistance
- Anti-Reflection surface treatment
Specifications:
- Rated Power: 250W
- Open circuit voltage (VOC): 37.6 V
- Max power voltage (VMP): 30.3 V
- Short circuit current (ISC): 8.85 A
- Max power current: 8.27 A
- Power Tolerance 0/+3%
- Maximum system voltage: 600V (UL)
- Fuse Rating: 15 A
- IP65 Junction Box w/MC4 Compatible Connectors
- Frame: Anodized aluminum alloy
- Weight: 41 lbs.
- Dimensions: 64.95 × 39.05 × 1.37 inches (1650 × 992 × 35mm)
POWERUPESS is a provider of high quality energy storage system using Lithium Iron Phosphate . Our current model is made with Grade-A UL Listed cells with a high quality and Reliable BMS. The integration (closed-loop-communication) of our product with other power electronics is seamless.
A Grade UL Listed cells, same factory as competition product
5 Year Warranty 6000 Cycles 90% DOD ,
Electric Specs:
- Nominal Voltage 51.2 V
- Mean Operation Voltage 49.5-50.5V
- Nominal Capacity 100 Ah
- Energy 5120 Wh
- Communication CAN 2.0 / RS232/ RS485
- Resistance ≤40 mΩ @ 50% SOC
Charge:
- Recommended Charge Current 20A (Charge time: ≈6hrs)
- Maximum Charge Current 100A (Charge time: ≈2hrs)
- Charge Over Current Protection (BMS) 110±5A
- Recommended Charge Voltage 53.2-54V
- Charge Cut-Off Voltage (BMS) 3.70±0.025 V/Cell (1sec)
- Reconnect Voltage (BMS) 3.45±0.02 V/Cell
- Balancing Voltage Threshold (BMS) 3.45V/Cell
Additional information
| Weight | 1900 lbs |
|---|
Related Products
Reliable 1500W 12V Inverter
