Shop Products

Showing 81–96 of 415 resultsSorted by popularity

  • Enphase Q Cable w/Connector for 60 Cell Lan

    Enphase Q Cable w/Connector for 60 Cell Lan

    $23.50

    In short: This Enphase Q-12-17-240 landscape Q Cable is a lightweight, outdoor-rated trunk cable with pre-installed connectors spaced for 60-cell panels installed horizontally. It simplifies AC wiring by linking multiple microinverters quickly and reliably in Enphase solar PV systems.

    -

    Add to cartLoading Done
  • EG4 Solar 24K BTU Hybrid Minisplit Kit 3.2KW Panels

    EG4 Solar 24K BTU Hybrid Minisplit Kit 3.2KW Panels

    $3,500.00

    The EG4 Solar Powered Mini-Split AC/DC Air Conditioner/Heat Pump, also known as a solar AC, solar mini split, or solar heat pump, provides energy-efficient and eco-friendly temperature control. This advanced ductless heat pump/air conditioner is engineered to reduce your electric bill while ensuring that your living spaces stay comfortably cool or warm.

    -

    Add to cartLoading Done
  • Alexus Solar 400W Mono Solar Panels Pallet of 36

    Alexus Solar 400W Mono Solar Panels Pallet of 36

    $5,184.00

    Alexus Solar 400W Mono Solar Panels Pallet of 36

    -

    Add to cartLoading Done
  • 100a Battery Meter LCD with Backlight

    100a Battery Meter LCD with Backlight

    $15.00

    The Battery Meter LCD with Backlight battery meter is a device utilized to show how much electricity your solar panels are producing and the voltage.

    -

    Add to cartLoading Done
  • Simple Tilt Knee, Set for K2 Simple Tilt System

    Simple Tilt Knee, Set for K2 Simple Tilt System

    $20.00

    A tilt adjustment accessory for the K2 CrossRail Simple Tilt System, the K2 Systems Simple Tilt Knee Set provides an integrated bracket and hardware that enable fixed tilt angles on solar rail installations, making it easier and faster to achieve optimized panel tilt on flat or low-slope roofs.

    -

    Add to cartLoading Done
  • Victron 60A 250/60 Smart Charge Controller

    Victron 60A 250/60 Smart Charge Controller

    $435.20

    Maximize solar energy storage with the Victron 60A 250/60 Smart Charge Controller. Ensure fast charging and extended battery life with advanced SmartSolar technology.

    -

    Add to cartLoading Done
  • Line Set Pre-Charged 16 ft. 3/8 in. | R32 | 12k Indoor Unit | 9k/12k AC Input, 12k AC/DC Single Zones

    Line Set Pre-Charged 16 ft. 3/8 in. | R32 | 12k Indoor Unit | 9k/12k AC Input, 12k AC/DC Single Zones

    $147.99

    Line Set Pre-Charged 16 ft. 3/8 in. | R32 | 12k Indoor Unit | 9k/12k AC Input, 12k AC/DC Single Zones

    -

    Add to cartLoading Done
  • Illustration of a ground-mount solar panel system with a 4x2 configuration, supported by metal frames and concrete foundation pillars.

    Tamarack Solar Ground Mount Kit 90804 for 4 Add Column KIT B 93″ Rails

    $478.75

    The Tamarack Ground Mount System is assembled using 3.1 rail with 2-inch schedule 40 or 80 galvanized steel pipe that is purchased separately.  The system comes with all parts needed except for the pipe and concrete. Assembly is quick and easy and can be used on almost any terrain.

    -

    Add to cartLoading Done
  • Line Set Pre-Charged 26 ft. 3/8 in. | R32 | 12k Indoor Unit | 9k/12k AC Input, 12k AC/DC Single Zones

    Line Set Pre-Charged 26 ft. 3/8 in. | R32 | 12k Indoor Unit | 9k/12k AC Input, 12k AC/DC Single Zones

    $186.99

    Line Set Pre-Charged 26 ft. 3/8 in. | R32 | 12k Indoor Unit | 9k/12k AC Input, 12k AC/DC Single Zones

    -

    Add to cartLoading Done
  • Sample solar permit plan set showing technical drawings and layout schematics for a residential solar panel installation.

    Standard Grid Tie Plan Set Without Stamping

    $500.00

    YOUR SOLAR PLAN SET PACKAGE INCLUDES: Detailed Solar Plan Set: A custom solar plan set for your project. Includes: site plan drawing electrical wiring diagram mounting attachment/structure details schematics, spec…

    -

    Add to cartLoading Done
  • EG4 Chargeverter Plus - GC | 48V 100A Battery Charger 5120W Output | 240/120V Input

    EG4 Chargeverter Plus – GC | 48V 100A Battery Charger 5120W Output | 240/120V Input

    $624.99

    A high-power 48 V, 100 A battery charger with 5,120 W output and dual 120 V/240 V input—designed for efficient residential and off-grid charging.

    -

    Add to cartLoading Done
  • Integra 10 Pack BoltsIR-T1 TileBallast No Penetration Tile Roof Mounting System

    Integra 10 Pack BoltsIR-T1 TileBallast No Penetration Tile Roof Mounting System

    $129.99

    The IntegraRack IR-T1 TileBallast™ is a groundbreaking tile-roof mounting bracket that requires no tile removal and no roof penetration, offering a fully non-invasive solution for concrete tile roofs. Instead of screwing through tiles, the IR-T1 uses IntegraGel industrial-strength epoxy to bond three overlapping concrete tiles together, leveraging their weight as ballast. This system dramatically speeds up installation (up to 4× faster than traditional tile hooks), while also increasing structural strength. Tested in a wind tunnel at over 165 MPH (3:1 safety factor), the IR-T1 is built to withstand severe wind conditions without compromising roof integrity. It includes an integrated upright mount that supports any rail system, making it highly flexible for solar module installation.

    -

    Add to cartLoading Done
  • IntegraRack IR-40FSA BallastRack Fixed Adjustable Angle Solar Module Rack

    IntegraRack IR-40FSA BallastRack Fixed Adjustable Angle Solar Module Rack

    $139.99

    The IntegraRack IR-40FSAB BallastRack™ is a high-performance ground-mount racking system engineered for maximum flexibility in tilt angle and site conditions. Constructed from high-strength steel with a black zinc plating, the IR-40FSAB offers fixed-adjustable tilt from 15° to 40° in 2.5° increments — allowing you to optimize for annual solar production while maintaining structural durability. This system supports a variety of ballast or mounting methods (e.g., sandbags, water tanks, concrete curb stops, or anchor spikes), so you can install without poured concrete footings. The modular, “U”-shaped frame design enables fast assembly in ~2 minutes, while full row installation (frame + ballast + modules) can be completed in about 10 minutes per module, significantly reducing labor. It’s UL-2703 certified for bonding and mechanical strength, making it reliable and code-compliant for residential or commercial solar projects.

     

    -

    Add to cartLoading Done
  • EG4 USB Read/Write Cable

    EG4 USB Read/Write Cable

    $15.99

    For PC Communication or Updating Firmware on EG4 Batteries

    -

    Add to cartLoading Done
  • Airspool Solar 12K BTU Hybrid Minisplit Kit 2KW Used Solar Panels

    Airspool Solar 12K BTU Hybrid Minisplit Kit 2KW Used Solar Panels

    $1,902.00
    Airspool Standard Unit (DIY), this is NOT the Airspool Quick ‘n’ Easy. Normal vacuum pump, gauge work, and electrical work will need to be performed

    -

    Add to cartLoading Done
  • Sample solar permit plan set showing technical drawings and layout schematics for a residential solar panel installation.

    Standard Grid Tie Plan Set With Stamping

    $999.00

    YOUR SOLAR PLAN SET PACKAGE INCLUDES: Detailed Solar Plan Set: A custom solar plan set for your project. Includes: site plan drawing electrical wiring diagram mounting attachment/structure details schematics, spec…

    -

    Add to cartLoading Done

End of content

End of content

10% OFF PALLETS! – CODE: 10pallets