EG4 Brightmount V2.1 Groundmount with Extensions 3-4 panels
$299.00EG4 Brightmount V2.1 Groundmount with Extensions 3-4 panels
Ground Mount
Showing all 14 resultsSorted by popularity
-
-
Integrarack IR MultiBallast 5° East / West ‘W’ Configuration
$48.49The IntegraRack IR MultiBallast™ (5° East/West ‘W’) is a modular, non-penetrating solar racking system built from aircraft-grade aluminum. Designed for both flat roofs and ground mounts, this configuration delivers a gentle 5° tilt with an East/West “W” layout — ideal for maximizing energy yield while reducing ballast weight. The MultiBallast system uses just four main components, can be ballasted with standard concrete blocks (CMU), or mounted with industrial polyurethane if needed. With its streamlined modular design, it’s fast to install, supports any panel size, and conforms to UL-2703 for bonding and mechanical strength.
-
-
-
-
Tamarack Solar Ground Mount Kit 90804 for 4 Add Column KIT B 93″ Rails
$478.75The Tamarack Ground Mount System is assembled using 3.1 rail with 2-inch schedule 40 or 80 galvanized steel pipe that is purchased separately. The system comes with all parts needed except for the pipe and concrete. Assembly is quick and easy and can be used on almost any terrain.
-
IntegraRack IR-45ASA Adjustable Seasonal Angle BallastRack™ Solar Module Racking System | 1 Adjustable Leg
$199.99The IntegraRack IR-45ASA BallastRack™ is a flexible, high-performance ground-mount racking system engineered to let you seasonally adjust your panel tilt between 15° and 45°. Built from 6061-T6 aircraft-grade aluminum (or optionally black zinc-plated high-strength steel), this system allows each panel’s angle to be tuned independently. It mounts without concrete footings, post-driving, or augers — using a variety of ballast or anchor options. Frames assemble in ~2 minutes and deliver excellent clearance, high wind and snow load resilience, and low installed cost per watt.
-
IntegraRack IR-40FSA BallastRack Fixed Adjustable Angle Solar Module Rack
$139.99The IntegraRack IR-40FSAB BallastRack™ is a high-performance ground-mount racking system engineered for maximum flexibility in tilt angle and site conditions. Constructed from high-strength steel with a black zinc plating, the IR-40FSAB offers fixed-adjustable tilt from 15° to 40° in 2.5° increments — allowing you to optimize for annual solar production while maintaining structural durability. This system supports a variety of ballast or mounting methods (e.g., sandbags, water tanks, concrete curb stops, or anchor spikes), so you can install without poured concrete footings. The modular, “U”-shaped frame design enables fast assembly in ~2 minutes, while full row installation (frame + ballast + modules) can be completed in about 10 minutes per module, significantly reducing labor. It’s UL-2703 certified for bonding and mechanical strength, making it reliable and code-compliant for residential or commercial solar projects.
-
-
Tamarack Ground Mount Kit C – 3 Modules – 140-IN – for 0 Posts
$305.00The Tamarack Ground Mount Kits allow for two design configurations, either three or four modules per column in landscape orientation (long side of the modules parallel to the ground). The system comes with all parts needed except for the pipe and concrete. Assembly is quick and easy and can be used on almost any terrain.
-
Integra BallastRack IR-30 Racking System (Single Frame)
$129.99The IntegraRack IR-30 BallastRack™ (Single Frame) is a lightweight, fast-install ground-mount racking system engineered for rapid deployment and broad module compatibility. Constructed from aircraft-grade 6061-T6 aluminum, the IR-30 provides a fixed 30° tilt optimized for year-round solar production and is engineered to accept multiple ballast options (sand, water, concrete, or earth fill) so you can avoid concrete footings or driven posts. The modular “U”-shaped frames assemble in minutes and support large and jumbo modules while meeting UL-2703 bonding and mechanical requirements — making the IR-30 ideal for commercial, residential and remote installations that demand low labor cost and quick installation.
-
Tamarack Ground Mount Kit A – 3 Modules – 140-IN – for 4 Posts
$500.00The Tamarack Ground Mount Kits allow for two design configurations, either three or four modules per column in landscape orientation (long side of the modules parallel to the ground). The system comes with all parts needed except for the pipe and concrete. Assembly is quick and easy and can be used on almost any terrain.
-
Tamarack Ground Mount Kit B – 3 Modules – 140-IN – for 2 Posts
$404.90The Tamarack Ground Mount Kits allow for two design configurations, either three or four modules per column in landscape orientation (long side of the modules parallel to the ground). The system comes with all parts needed except for the pipe and concrete. Assembly is quick and easy and can be used on almost any terrain.
-
Integra BallastRack IR-15 Racking System (Single Frame)
$129.99The IntegraRack IR-15 BallastRack™ (Single Frame) is a lightweight, fast-install ground-mount racking system engineered for rapid deployment and broad module compatibility. Constructed from aircraft-grade 6061-T6 aluminum, the IR-30 provides a fixed 15° tilt optimized for year-round solar production and is engineered to accept multiple ballast options (sand, water, concrete, or earth fill) so you can avoid concrete footings or driven posts. The modular “U”-shaped frames assemble in minutes and support large and jumbo modules while meeting UL-2703 bonding and mechanical requirements — making the IR-30 ideal for commercial, residential and remote installations that demand low labor cost and quick installation.
End of content
End of content