Enphase Q Cable w/Connector for 60/72 Cell Portrait
$22.00
-
this Q Cable is a specialized AC trunk cable for Enphase microinverters on 60/72-cell portrait solar arrays. It simplifies wiring by combining multiple inverter connections into one outdoor-rated run with pre-installed connectors and is lighter and easier to manage than previous generation cables.
-
This is a pre-wired, outdoor-rated AC trunk cable used with Enphase IQ Series microinverters on solar PV arrays. It’s specifically designed for portrait-oriented solar panels with 60 or 72 cells.
 Key Features
-
Pre-installed connectors along the cable let microinverters plug directly in — no separate wiring for each inverter is needed.
-
Connector spacing is typically about 1.3 m (about 4.2 ft) to match portrait panel rows.
-
The cable is a continuous length of 12 AWG with double insulation and is significantly lighter than older Enphase cable generations, making installation simpler.
-
It’s rated for up to ~600 V with connectors rated ~250 VAC, and uses THHN/THWN-2 insulation for both wet and dry conditions.
-
Plug-and-play design and cable numbering improve wire management and speed up install.
 Typical Use
-
Used on the AC side of solar panels in a portrait layout to connect multiple microinverters in series to the branch circuit.
-
Cable can be cut or extended as needed, and unused connectors are sealed with caps (sold separately).
 Notes
-
It’s considered a professional installation component — usually installed by a solar electrician or installer.
-
Different lengths/connectors exist for landscape orientation or different microinverter models; make sure to match the cable type to your system.
| Weight | 0.8 lbs |
|---|---|
| Dimensions | 1 × 1 × 1 in |
| Brand | |
| Application | Grid-Tied |
Spec sheet
Spec sheet – enphase_Q_cable_w_connector_spec_sheet
Reviews
There are no reviews yet.