Tamarack Solar Ground Mount Kit 90798 for 4 First Column KIT A 93″ Rails

Tamarack Ground Mount System

Tamarack Solar Ground Mount Kit 90798 for 4 First Column KIT A 93″ Rails

[tabs slidertype=”top tabs”] [tabcontainer] [tabtext]Description[/tabtext] [tabtext]Documents[/tabtext] [tabtext]Videos[/tabtext] [tabtext]Warranty[/tabtext] [/tabcontainer]

[tabcontent]

[tab]

• Introducing a groundbreaking advancement in railed system technology – the first significant innovation in years.Installation is simplified with a single tool, making the process straightforward and highly intuitive.Our rails incorporate a unique internal splice design, enabling the economical use of shorter rails. This low-cost splice is tool-free to install and seamlessly integrates without obstructing module clamps or roof mounts.Featuring an industry-first innovation, our 5050 Module Clamp functions both as a mid-clamp and an end-clamp across all module types. Despite imitations, our original design remains unparalleled in its effectiveness.For those seeking a polished, premium look, our Channel Clamp can be utilized at row ends to allow rails to be cut flush with module frames, enhancing the system’s aesthetics.Experience superior wire management through the use of open rail channels for both module and MLPE wiring, setting a new standard for efficiency and organization in railed systems.

  The system comes with all parts needed except for the pipe and concrete. Assembly is quick and easy and can be used on almost any terrain.

  ally

Features:

• Simple to Design – Arrays can be in columns of 3 or 4 module high and any width required
• Easy to Install – No welding or drilling and two wrench sizes fit all fasteners
• UL 2703 Listed – All components meet the UL 2703 standards for bonding and grounding
• PE Certified – Pre-stamped engineering letters available for most states
• Easy to Configure – Unlimited system size with tilt angles from 0 to 45 degrees
• Visually Appealing – Simple to adjust for perfect alignment, even if the surface is irregular
• Easy Wire Management -PV cables and wiring for module-level electronics fits inside rails to avoid time-consuming wire management
• Extremely Robust – For use in location with wind speeds up to 170MPH and

Parts Included in Kit

• Four 93″ rails
• Four 2″ Tee-Fittings
• Two splices
• Four Pipe Mounts
• Ten 5050 Clamps
• Four End Caps
• Eight Module Lead Clips
• One Ground Clamp

This kit is used for the first column of a 4 row array. For each additional column use the Tamarack Solar Ground Mount Kit for 4 Add Column KIT B 90804. If installation will be in a heavy wind area or heavy snow area consider adding vertical braces. You will need Tamarack Solar 2″ Swivel Tee Fitting for Cross Bracing 89778 to add vertical bracing. Add 4 for the first column and 2 every additional column. If you would like some assistance please call and talk to one of our sales reps. We will be glad to help.

[/tab]

[tab]
Click Here For Data Sheet
[/tab]

[tab]

[/tab]

[tab]
10 Year Warranty
[/tab]

[/tabcontent]
[/tabs]