Showing 33–48 of 77 resultsSorted by popularity
A tilt adjustment accessory for the K2 CrossRail Simple Tilt System, the K2 Systems Simple Tilt Knee Set provides an integrated bracket and hardware that enable fixed tilt angles on solar rail installations, making it easier and faster to achieve optimized panel tilt on flat or low-slope roofs.
The Tamarack Ground Mount System is assembled using 3.1 rail with 2-inch schedule 40 or 80 galvanized steel pipe that is purchased separately. The system comes with all parts needed except for the pipe and concrete. Assembly is quick and easy and can be used on almost any terrain.
The IntegraRack IR-T1 TileBallast™ is a groundbreaking tile-roof mounting bracket that requires no tile removal and no roof penetration, offering a fully non-invasive solution for concrete tile roofs. Instead of screwing through tiles, the IR-T1 uses IntegraGel industrial-strength epoxy to bond three overlapping concrete tiles together, leveraging their weight as ballast. This system dramatically speeds up installation (up to 4× faster than traditional tile hooks), while also increasing structural strength. Tested in a wind tunnel at over 165 MPH (3:1 safety factor), the IR-T1 is built to withstand severe wind conditions without compromising roof integrity. It includes an integrated upright mount that supports any rail system, making it highly flexible for solar module installation.
S-5! SolarFoot Brackets Attachment For Metal Roofs
Tamarack Ground Mount System Tamarack Solar Ground Mount Kit 90798 for 4 First Column KIT A 93″ Rails [tabs slidertype=”top tabs”] [tabcontainer] [tabtext]Description[/tabtext] [tabtext]Documents[/tabtext] [tabtext]Videos[/tabtext] [tabtext]Warranty[/tabtext] [/tabcontainer] [tabcontent] [tab] Introducing…
A stainless steel conduit management clamp for K2 CrossRail mounting systems, the K2 Conduit Clamp CrossRail Kit attaches into the rail’s side channel with included T-Bolt hardware and provides a quick, secure way to route and support conduit using a tool-less snap-fit design.
The IntegraRack IR-T1 TileBallast™ is a groundbreaking tile-roof mounting bracket that requires no tile removal and no roof penetration, offering a fully non-invasive solution for concrete tile roofs. Instead of screwing through tiles, the IR-T1 uses IntegraGel industrial-strength epoxy to bond three overlapping concrete tiles together, leveraging their weight as ballast. This system dramatically speeds up installation (up to 4× faster than traditional tile hooks), while also increasing structural strength. Tested in a wind tunnel at over 165 MPH (3:1 safety factor), the IR-T1 is built to withstand severe wind conditions without compromising roof integrity. It includes an integrated upright mount that supports any rail system, making it highly flexible for solar module installation.
The IntegraRack IR-45ASA BallastRack™ is a flexible, high-performance ground-mount racking system engineered to let you seasonally adjust your panel tilt between 15° and 45°. Built from 6061-T6 aircraft-grade aluminum (or optionally black zinc-plated high-strength steel), this system allows each panel’s angle to be tuned independently. It mounts without concrete footings, post-driving, or augers — using a variety of ballast or anchor options. Frames assemble in ~2 minutes and deliver excellent clearance, high wind and snow load resilience, and low installed cost per watt.
The IntegraRack IR-40FSAB BallastRack™ is a high-performance ground-mount racking system engineered for maximum flexibility in tilt angle and site conditions. Constructed from high-strength steel with a black zinc plating, the IR-40FSAB offers fixed-adjustable tilt from 15° to 40° in 2.5° increments — allowing you to optimize for annual solar production while maintaining structural durability. This system supports a variety of ballast or mounting methods (e.g., sandbags, water tanks, concrete curb stops, or anchor spikes), so you can install without poured concrete footings. The modular, “U”-shaped frame design enables fast assembly in ~2 minutes, while full row installation (frame + ballast + modules) can be completed in about 10 minutes per module, significantly reducing labor. It’s UL-2703 certified for bonding and mechanical strength, making it reliable and code-compliant for residential or commercial solar projects.
The DAP StormBond 2 Roof Tile Adhesive is a high-performance two-component polyurethane foam adhesive engineered for heavy-duty bonding of solar pedestal systems and roof tile applications. Ideal for use in the Solar Stack mounting system, StormBond 2 delivers exceptional bond strength, superior durability and rapid cure time — enabling safer, faster solar installations without penetrating the roof substrate. Designed for commercial and residential low-slope or tile roofs, StormBond 2 ensures your solar mounting system remains securely attached, even under high wind loads and rigorous code conditions.
The Solar Stack DAP Adhesive Cleaner (Cold Weather) is a professional-grade solvent cleaner formulated to safely and efficiently remove uncured or excess adhesive from Solar Stack foam systems and applicator tools used in cold climates. Specifically engineered to work with Solar Stack SS-CW (Cold Weather) Foam Adhesive and the DAP Sharpshooter XP Applicator, this cleaner ensures smooth operation, reduced clogging, and longer tool life, even in low-temperature conditions.
The Tamarack Ground Mount Kits allow for two design configurations, either three or four modules per column in landscape orientation (long side of the modules parallel to the ground). The system comes with all parts needed except for the pipe and concrete. Assembly is quick and easy and can be used on almost any terrain.
The IntegraRack IR-30 BallastRack™ (Single Frame) is a lightweight, fast-install ground-mount racking system engineered for rapid deployment and broad module compatibility. Constructed from aircraft-grade 6061-T6 aluminum, the IR-30 provides a fixed 30° tilt optimized for year-round solar production and is engineered to accept multiple ballast options (sand, water, concrete, or earth fill) so you can avoid concrete footings or driven posts. The modular “U”-shaped frames assemble in minutes and support large and jumbo modules while meeting UL-2703 bonding and mechanical requirements — making the IR-30 ideal for commercial, residential and remote installations that demand low labor cost and quick installation.
End of content
End of content
You must be logged in as a customer to view that page.
PICK ONE: 10% OFF Panels VS 5% OFF Accessories – CODES: 10panels | 5acc
